Rockwell Automation 61C345 4 Input 4-20mA Analog Rail Module User Manual
Page 19
3Ć5
Channel 0
Channel 1
Channel 2
Channel 3
Common
1
2
3
Common
4
5
6
+
-
I
Source
IĆIn
Common
7
8
9
+
-
I
Source
IĆIn
Common
10
11
12
+
-
I
Source
IĆIn
+
-
I
Source
IĆIn
Figure 3.2 Ć Typical Recommended Input Shielding Methods
Step 11. Turn off power to the Reliance device that will be
connected to the Analog Rail module.
Step 12. Set the Mode" switch on the faceplate of the Analog Rail
module to the desired position.
Step 13. Connect the I/O Rail cable between the Analog Rail
connection labeled Input" and an I/O port on the
Reliance device that will communicate with the module.
Turn on power to the Reliance device that will
communicate with the Analog Rail module. Recall that the
Mode switch is read each time the Reliance device
connected to the module is powered up.
Step 14. The Analog Rail installation is now ready for testing.
Inspect all work to assure that the installation has been
performed properly.
Step 15. Turn on power to the Input Power" wiring. Turn on power
to the external hardware. See Appendix A for the power
supply specifications.