Rockwell Automation 1799-D16U16BAGL 16 Input/16 Output Digital and 2 Input/2Output Analog - Manual (Page 12)

12 16 Input/16 Output Digital and 2 Input/2 Output Analog Embedded I/O Boards
Publication 1799-IN011A-EN-P - February 2007
Connect the Field Output Device to the I/O Connector (P5)
The 1799-D16U16BAGL boards have outputs that supply current to your field output device
(sourcing outputs).
The outputs on these boards are isolated in two groups of eight, with each group requiring
24V dc power and 24V dc ground. Outputs 0…7 are powered from +24V GRP 0 and return
power via GRP 0 Return. Outputs 8…15 are powered from +24V GRP 1 and return power
via GRP 1 Return.
Use the following wiring diagrams to connect both groups of outputs on these boards.
1799-D16U16BAGL Outputs (Sourcing)
The 1799-D16U16VAGL board has outputs that receive current from your field output
device (sinking outputs). The outputs on these boards are in two groups of eight, with each
group requiring 24V dc power and 24V dc ground. Outputs must be from a single 200 VA
supply powered from +24V GRP and return power via GRP Return.
1799-D16U16VAGL Outputs (Sinking)
Load
Pin 8,30
GRP 0
Return
Pins 10, 15
+24V
GRP 0
+
_
42563
Pins 9, 11-14,
16, 17, 29
Output X
Load
+
_
Pin 24, 36
GRP 1
Return
Pins 4, 5
+24V
GRP 1
Pins 1-3,
18-20, 34, 35
Output X
GRP 0 GRP 1
Load
+
_
Load
+
_
Load
+
_
Pin 8,
30
GRP
Return
Pins 10, 15
+24V
GRP
Pins 9, 11-14,
16, 17, 29
Output X
Pin 24,
36
GRP
Return
Pins 4, 5
+24V
GRP
Pins 1-3,
18-20, 34, 35
Output X
GRP 0 GRP 1
42564