Rockwell Automation 1799-D16U16BAGL 16 Input/16 Output Digital and 2 Input/2Output Analog - Manual (Page 4)

4 16 Input/16 Output Digital and 2 Input/2 Output Analog Embedded I/O Boards
Publication 1799-IN011A-EN-P - February 2007
Parts List
Your package contains:
• one 1799 I/O board.
• installation instructions.
Optional Hardware
All mating connectors and mounting hardware must be ordered separately. The following
table identifies the different connector and hardware options.
Install the Board
To install the board do the following:
• Set the node address.
• Mount the board (brackets or mounting screws).
• Connect the board (DeviceNet network, I/O).
• Connect the board (power).
• Communicate with your board.
• Configure the parameters.
More detailed information about each of these steps is included in the following procedures.
Option Catalog Number Third Party Supplier & Part Number
2 DIN rail brackets (4 screws) 1799-BRKD N/A
5-position, open-style plug for
DeviceNet network (2 locking screws) 1799-DNETSCON DeviceNet Buyer’s Guide at
http://www.odva.org
50-pin, D-sub I/O mating connector -
solder cup 1799-DSSCON Amphenol Corp. - 777DF-D50P
ITT Cannon - DDM50PK127
50-pin, D-sub I/O mating connector -
header and crimp pins 1799-DSCCON Tyco Electronics - 205212-1 (header)
Tyco Electronics - 66506-4 (pins)
EBY Co. - DR50-P02-0S (header only)
9-pin, D-sub I/O mating connector -
solder cup 1799-DSS9CON Tyco Electronics - 747904-5
9-pin, D-sub I/O mating connector -
header and crimp pins 1799-DSC9CON Tyco Electronics - 6-66506-1