Rockwell Automation 1799-D16U16BAGL 16 Input/16 Output Digital and 2 Input/2Output Analog - Manual (Page 18)

18 16 Input/16 Output Digital and 2 Input/2 Output Analog Embedded I/O Boards
Publication 1799-IN011A-EN-P - February 2007
Additional Parameters
Parameter Description
AI Low Scaling Analog input low scaling value or low engineering units.
AI High Scaling Analog input high scaling value or high engineering units.
AI Digital Filter Controls digital filter time constant.
AI Alarm (Low/High Low)
Low/High High) Control alarm status when input exceed alarm threshold.
AI Input Range Defines type and range of input signal. Controls way of calibration.
AI Enable Alarm Latch Controls latch of alarm status until a reset latch service is issued.
AI Disable Alarms Controls function of alarm.
AI Notch Filter Controls sample rate of A/D converter.
AI Update Rate Assigns the rate at which the inputs are sampled by firmware.
AO Fault Value Controls output value during communication fault.
AO Idle Value Controls output value during idle or program mode.
AO Low Scaling Analog output low scaling value or low engineering units.
AO High Scaling Analog output high scaling value or high engineering units.
AO Low Clamp The lowest value of the output. If the output value is set below this
value, the output will be set to the low clamp value.
AO High Clamp The highest value of the output. If the output value is set above this
value, the output will be set to the high clamp value.
AO Output Range Defines type and range of output signal. Controls way of calibration.
AO Fault State Controls the output choices during a communication fault.
AO Idle State Controls the output choices during idle or program mode.
AO Enable Alarm Latch Controls latch of alarm status until a reset latch service is issued.
AO Disable Alarms Controls function of alarm.