Rockwell Automation 5370 CVIM Communications Manual User Manual
Page 141
Chapter 6
Using the Pyramid Integrator Backplane
6–8
CONTROL BLOCK 0MSG0:0
F1 Requested Size(element):
0
F2 Priority:
HIGH
F3 Local/Remote:
LOCAL
F4 Local Link Type:
DH+
F5 Remote Link Type:
N/A
F6 Station ID:
Node# = 0
F7 Module ID:
Class = CVIM Tw# = 1 Port# = 1
F8 Communication Command:
TYPED READ
F9 Internal Data Table Addr:
0L9:0
F10External Data Table Addr:
”>rc,cb*”
Parameters:
N/A
CONTROL BLOCK OMSG0:1
F1 Requested Size(element):
0
F2 Priority:
HIGH
F3 Local/Remote:
LOCAL
F4 Local Link Type:
DH+
F5 Remote Link Type:
N/A
F6 Station ID:
Node# = 0
F7 Module ID:
Class = CVIM Tw# = 1 Port# = 1
F8 Communication Command:
TYPED WRITE
F9 Internal Data Table Addr:
0L9:0
F10External Data Table Addr:
”>w,cb*”
Parameters:
N/A
If you are accessing results through a MicroVAX information processor, you
should use the standard library functions to access the data. The MicroVAX
library instructions are called up using a simplified “C” type language. For
example:
DTL__READ__W(Address, &Result, &Error);
Refer to the MicroVAX manuals for the available library routines.
Sample PLC–5/250 Program
(cont’d)
Obtaining Inspection Result
Information Using a MicroVAX
Information Processor