Rockwell Automation 6185-F RAC6185 Industrial Flat Panel Monitors User Manual User Manual
Page 28
Advertising
Publication 6185-UM006A-EN-P - July 2002
3-6 Configuring the Video Setup
Figure 3.2 Example of ScreenSet Utility.
Your actual setup screen may look slightly different.
3. Press the Auto button at the rear of your monitor. The auto adjustment
display appears.
Your screen may flicker during the Auto Setup process. When the auto
adjustment display reaches 100, it will disappear, and your monitor should be
properly adjusted.
Figure 3.3 Auto Adjustment Display
TIP
A computer switches through several different video
modes while booting. The monitor stores setup
information for each video mode. If you have trouble
reading the display during the booting video modes, you
can also press the Auto key during that time.
Advertising