Rockwell Automation 6185-F RAC6185 Industrial Flat Panel Monitors User Manual - Manual (Page 39)

Publication 6185-UM006A-EN-P - July 2002
System Troubleshooting 5-3
Allen-Bradley Support Rockwell Automation offers support services worldwide. Refer
to Allen-Bradley Support on page P-3 for complete product support
information.
Screen image is not centered or sized properly Adjust the Horizontal and Vertical position settings using the OSD. Refer to OSD Menus
and Adjustment Instructions on page 3-8.
Check the Image Size selection using the OSD. Refer to OSD Menus and Adjustment
Instructions on page 3-8.
Perform Auto Setup. Refer to Performing Automatic Setup on page 3-5.
Color is not uniform
Colors are distorted with dark or shadowed
areas
White does not look white Adjust the Color setting using the OSD. Refer to OSD Menus and Adjustment
Instructions on page 3-8.
Image position changes are not saved Reposition the image using the OSD. Refer to OSD Menus and Adjustment Instructions
on page 3-8. Wait 5 seconds for the changes to be saved before you turn off power.
The power indicator blinks amber once The monitor is saving your changes to the OSD.
The power indicator blinks. The monitor is using its power management.
Table 5.A Troubleshooting Table
Symptom Action
(continued)