Rockwell Automation 6185-F RAC6185 Industrial Flat Panel Monitors User Manual - Manual (Page 47)

1 Publication 6185-UM006A-EN-P - July 2002
Appendix
C
Video Cables
You can use a HD-15 connector cable to connect your monitor to the host
computer.
HD-15 Video Connector The HD-15 video cable you use with this monitor is equipped with a
conventional HD-15 connector at each end.
Figure C.1 HD-15 Video Connector
Looking into pin end of male connector or solder term end of female connector
The following table provides the pin numbers and corresponding pin
assignments for the HD-15 video connector with the DDC2B capability.
Table 3.A Standard HD-15 Video Cable
Monitor (Female) Signal Description Host (Male)
1 Red Video 1
2 Green Video 2
3 Blue Video 3
4 Not Used 4
5 Return 5
6 Red Video Ground 6
7 Green Video Ground 7
8 Blue Video Ground 8
9 Not Used 9
10 Sync Ground 10
11 Not Used 11
12 Bi-Directional Data 12
13 Horizontal Sync 13
14 Vertical Sync (VCLK) 14
15 Data Clock (SCL) 15