Performing a calibration – Rockwell Automation 6185-F RAC6185 Industrial Flat Panel Monitors User Manual User Manual
Page 45
Advertising
Publication 6185-UM006A-EN-P - July 2002
Touchscreen Serial Interface B-3
Once you have obtained this information, install the software using the
installation disks found in the touchscreen accessory package.
Performing a Calibration
After installing the driver software, follow the instructions in the touchscreen
documentation.
Following installation of the touchscreen software and calibration, the
touchscreen is ready to use.
TIP
Before installation, you may want to check the touchscreen
manufacturer’s site on the World Wide Web
(www.elotouch.com) for the latest software drivers.
Advertising