Rockwell Automation 6185-F RAC6185 Industrial Flat Panel Monitors User Manual - Manual (Page 31)

Publication 6185-UM006A-EN-P - July 2002
Configuring the Video Setup 3-9
Image Lock:
Fine Image Lock is used to fine tune the image by removing “noise” that
creates unstable images. If you cannot obtain satisfactory results
with Fine adjustment alone, then use the Coarse adjustment first.
1. Push the Menu button to open the OSD.
2. Push the + and - button until the Image Lock screen is
displayed.
3. Push the Menu button twice to open the Fine adjustment
screen.
4. Use the + and - buttons to manipulate the Fine adjustment
and remove image noise.
Horizontal Position Use the Horizontal Position control to adjust the horizontal position
of the image on the screen.
1. Push the Menu button to open the OSD.
2. Push the + and - button until the Horizontal Position screen
is displayed.
3. Push the Menu button to open the Horizontal Position
adjustment screen.
4. Use the + and - buttons to change the horizontal position of
the monitor’s viewing area.
Vertical Position Use the Vertical Position control to adjust the vertical position of
the image on the screen.
1. Push the Menu button to open the OSD.
2. Push the + and - button until the Vertical Position screen is
displayed.
3. Push the Menu button to open the Vertical Position
adjustment screen.
4. Use the + and - buttons to change the vertical position of
the monitor’s viewing area.
Reset:
Geometry Reset Reset is used to replace your manual settings with the factory
default values.
Geometry Reset returns the Position, Image Lock and Image Size
settings to their factory preset values.
1. Push the Menu button to open the OSD.
2. Push the + and - button until the Reset screen is displayed.
3. Push the Menu button twice to open the Geometry Reset
adjustment screen.
4. If you want to reset the monitor, press the + to select Yes.
Otherwise, use the - button to select No.
Table 3.D OSD Menus and Adjustment Instructions
Option Menu How To Adjust
(continued)