Rockwell Automation 57C610 Enhanced Basic Language, AutoMax - Manual (Page 133)

BĆ9
788 Hardware event ticks overflow
789 Print buffer overflow; print field too long
790 Device not open properly
791 OPEN with bad device address
792 Device not open for write
793 No stack space for print
794 Device not allocated
795 No buffer for print operation; insufficient memory
796 Fatal print error
797 Device already open
798 Device OPENed differently from attempted operation
799 Bad allocate
800 Bad default OPEN
801 Device already closed
802 Device opened as a channel
803 Bad device close; no address
804 Default device not allocated
805 Channel not open
806 Print integer channel overflow
807 Message overflow
808 Unsuccessful channel open
809 Integer > 24 bits in real conversion
810 Real to integer overflow
811 No buffer for GET operation
812 No print buffer
813 Device closed on GET
814 GET not open for read; GET attempted on unopened device
815 Bad GET operation
816 No buffer for PUT operation
817 No print buffer
818 Device closed on PUT statement
819 PUT not open for write; PUT attempted on unopened device
820 Unsuccessful PUT operation
821 Device should be open
822 Invalid baud rate
823 Bad SETUP reĆconfiguration
824 Precision out of range
825 Width too long printing integer field in PRINT USING D format
826 Width too long printing integer field in PRINT USING with L/R/C/Z format
827 Negative decimal places
828 Number decimal points greater than maximum precision allowed
829 Width less than zero
830 Field width overflow
831 Requested substring width less than zero
832 Requested width greater than maximum
833 No space for requested PRINT USING field
834 String greater than field width
835 Bad channel depth
836 Device not open
837 Attempted negative square root