Rockwell Automation 57C610 Enhanced Basic Language, AutoMax - Manual (Page 136)

BĆ12
1008 Broken wire in resolver
1009 (not used)
1010 Overspeed trip
1011 Power Technology module fault
1012 PMI power supply fault
1013 PMI bus fault
1014 UDC run fault
1015 Fiber optic link com. fault
Corrective action: These errors reflect the status of the drive fault register
(A=202, B=1202) on the UDC module. See SĆ3006 for more information.
Serial I/O Error Codes
The possible causes of serial I/O errors include:
A hardware problem with device connected to serial ports on the face of the
Processor module.
1064 EIA control (carrier detect) lost
1065 Parity error (when enabled)
1066 Overrun error
1067 Framing error
Distributed Power System Error Codes
2060 Bad wN in NOTCH block
2061 Bad Q value in NOTCH block
2062 ResN or resD out of range
2063 ZetaN or zetaD out of range
2064 LIM_BAR is out of range
2065 TRIP_TIME is out of range
2066 THRESHOLD is out of range