Rockwell Automation 2500 CENTERLINE MCC Joining and Splicing Columns - Manual (Page 14)

Publication 2500-IN004A-EN-P - August 2009
14 CENTERLINE 2500 Motor Control Centers Installing, Joining and Splicing Columns
10. For 600 mm Deep Columns, working from the left, use the
M6 x 1.0 hardware provided in the power bus splice kit to fasten
the six joining holes together.
Joining Hole Locations 600 mm Deep
IMPORTANT
Do not use hardware to draw cabinets together.
744,0
(29.29)
353,0
(13.90)
336,0
(13.23)
353,0
(13.90)
336,0
(13.23)
573,0
(22.56)
547,0
(21.54)
89,0
(3.50)
165,0
(6.50)
M6
M6
M6
M6
M6
M6
Front