Rockwell Automation 2500 CENTERLINE MCC Joining and Splicing Columns User Manual
Page 5
Advertising
Publication 2500-IN004A-EN-P - August 2009
CENTERLINE 2500 Motor Control Centers Installing, Joining and Splicing Columns 5
2. Remove the two front and two rear bolts per shipping angle
from the shipping skid.
3. Remove the shipping angles from the MCC.
MCC may now be removed from the shipping skid.
ATTENTION
Once the bolts are removed from the shipping angles, the MCC is no
longer secured on the skid.
Shipping Angle
(4 places)
Advertising