Rockwell Automation 2500 CENTERLINE MCC Joining and Splicing Columns - Manual (Page 6)

Publication 2500-IN004A-EN-P - August 2009
6 CENTERLINE 2500 Motor Control Centers Installing, Joining and Splicing Columns
Locating the Bus Splice Kits
Power bus splice kits, if required, are located within a wireway or
blank unit space. A fluorescent pink, removable label (on the outside
of the column) designates the location. PE splice kits are located in
the bottom horizontal wireway, fastened to the horizontal PE
conductor.
Locate the splice kits and set aside for later use.
Splice Kit Label