Rockwell Automation 2500 CENTERLINE MCC Joining and Splicing Columns - Manual (Page 18)

Publication 2500-IN004A-EN-P - August 2009
18 CENTERLINE 2500 Motor Control Centers Installing, Joining and Splicing Columns
Remove Secondary Splice Cover
4. Loosen the top and bottom screws on the primary splice cover,
slide the primary splice cover to the left, and remove the cover.
The screws will remain in the wireway.
Remove Primary Splice Cover
Loosen the screws on the
secondary splice cover.
Slide the secondary splice
cover to the right.
Remove the cover.
Loosen the screws on the
primary splice cover.
Slide the primary splice
cover to the left.
Remove the cover.