Rockwell Automation 2500 CENTERLINE MCC Joining and Splicing Columns - Manual (Page 22)

Publication 2500-IN004A-EN-P - August 2009
22 CENTERLINE 2500 Motor Control Centers Installing, Joining and Splicing Columns
Locating the PE Splice Bar
2. Use the PE splice bars to join the horizontal PE of each column
and assemble the splice bars and hardware as shown.
Splicing the PE Conductor
3. Tighten hardware to torque specifications.
See Torque Requirements for Hardware Connections on
page 23 .
Do not grease or lubricate hardware.
4. Replace horizontal wireway cover and check that bolts are
secure.
Splice bars are
attached.