Rockwell Automation 1797-RPFM ControlNet Ex Modular Repeater Adapter Fiber Repeater Module - Manual (Page 12)

12 ControlNet Ex Modular Repeater Adapter & Fiber Repeater Module
Publication 1797-5.15 - June 2010
Wire the Modules
1. Connect the ControlNet Ex tap drop cable to the connector after
removing the insulator boot.
2. Connect the fiber media to the fiber module by selecting either the left
or right set of receive and transmit ports and attaching the receive and
transmit fibers, as appropriate.
IMPORTANT
The tap drop BNC must have its insulator ring in position
when inserted in the adapter BNC connector.
IMPORTANT
Make note of which fiber is receive and which is transmit as
they must be interchanged at the opposite end.
41310
1797-RPFM
Channel 1
Channel 2
Receiver
Receiver
Transmitter
Transmitter
Bus
Proc
Fiber Hub Bus
41170
ControlNet Ex 
Coax Tap
Insulator Ring
Installed