Rockwell Automation 1797-RPFM ControlNet Ex Modular Repeater Adapter Fiber Repeater Module - Manual (Page 7)

ControlNet Ex Modular Repeater Adapter & Fiber Repeater Module 7
Publication 1797-5.15 - June 2010
8. Make sure the last fiber module has its backplane connector cover in
place.
9. Connect the adapter wiring as shown below in the Wiring section.
IMPORTANT
A DIN-rail end anchor (A-B part number 1492-EA35) must
be used on the left side of the adapter and on the right side of
the fiber module to keep the units from moving.
IMPORTANT
You can only attach two media modules to the repeater
adapter. If you exceed the module limit, you may cause
damage to the adapter or fiber modules and void the IS
certification.
41169