Installation in zone 1 for cenelec – Rockwell Automation 1797-RPFM ControlNet Ex Modular Repeater Adapter Fiber Repeater Module User Manual
Page 8
8 ControlNet Ex Modular Repeater Adapter & Fiber Repeater Module
Publication
1797-5.15 - June 2010
Installation in Zone 1 for CENELEC
Modules must not be exposed to the environment. Provide a suitable metal
enclosure. A label with this system marking must be attached near the main
components of the system. If the system is installed in a cabinet, this label
must be fixed inside the cabinet.
Installation in Division 1/Zone 1 for UL, C-UL and FM
This adapter must not be exposed to the environment. Provide a suitable
metal enclosure. This adapter has a protection factor of IP20.
Make certain that you only connect ControlNet Ex adapters to other
intrinsically safe system modules to maintain the integrity of the
intrinsically-safe backplane.
WARNING
Modules cannot be used in an intrinsically safe environment
after they have been exposed to nonintrinsically safe signals.
WARNING
This adapter cannot be used in an intrinsically safe environment
after it has been exposed to nonintrinsically safe signals.
0102
ControlNet Ex System
Allen-Bradley
Attention!
Avoid electrostatic charging!
-20
0
C <= Ambient Temperature <= +70
0
C
1 Allen-Bradley Dr.
Mayfield Hts., OH USA
DMT 99 ATEX E 065 X
II (1)2G Ex ia ib IIC
41307