Rockwell Automation 1797-RPFM ControlNet Ex Modular Repeater Adapter Fiber Repeater Module - Manual (Page 5)

ControlNet Ex Modular Repeater Adapter & Fiber Repeater Module 5
Publication 1797-5.15 - June 2010
DIN-Rail Mount the 1797-RPA and -RPFM
Refer to Mounting Dimensions on page 31. For panel mounting information,
see publication 1794-5.13.
1. Position the module on a 35 x 7.5 mm DIN rail (A-B part number
199-DR1) at approximately a 30 o angle.
2. Hook the lip on the rear of the adapter onto the top of the DIN rail,
and rotate the module onto the rail.
ATTENTION
This product is grounded through the DIN rail to the dedicated
intrinsic safety ground. Use zinc-plated yellow-chromate steel
DIN rail to assure proper grounding. The use of other DIN rail
materials (such as aluminum or plastic) that can corrode, oxidize,
or are poor conductors, can result in improper or intermittent
grounding.
ATTENTION
The DIN rail or mounting bracket must be appropriately
connected to the dedicated intrinsic safety ground.
41167
41166