Rockwell Automation 2711-M3A18L1_M3A19L1 PanelView 300 Micro Terminals Installation Instructions - Manual (Page 5)

PanelView 300 Micro Terminal 5
41061-156-01(A)
Hazardous Locations
This equipment is suitable for use in Class 1, Division 2, Groups A, B, C, D or
non-hazardous locations only. The following DANGER statement applies to use
in hazardous locations.
Use only the following communication cables in Class 1, Division 2, Hazardous
Locations.
!
DANGER Explosion Hazard
• Substitution of components may impair suitability for Class
I, Division 2.
• Do not disconnect equipment unless power has been
switched off and area is known to be non-hazardous.
• Do not connect or disconnect components unless power has
been switched off.
• All wiring must comply with N.E.C. article 501-4(b).
• Peripheral equipment must be suitable for the location it is
used in.
Environmental Classification Communication Cable
Class I, Division 2, Hazardous Locations
1761-CBL-PM01, Series C
1761-CBL-HM02, Series C
1761-CBL-AM00, Series C
1761-CBL-AP00, Series C
2711-CBL-PM05, Series C
2711-CBL-HM05, Series C
2711-CBL-PM10, Series C
2711-CBL-HM10, Series C