Rockwell Automation 2711-M3A18L1_M3A19L1 PanelView 300 Micro Terminals Installation Instructions - Manual (Page 7)

PanelView 300 Micro Terminal 7
41061-156-01(A)
Cutout Dimensions
Use the full size template shipped with the PV300 Micro to mark the cutout
dimensions. The figure below shows a reduced scale cutout. A full scale template
is also available inside the back cover of this document.
Clearances
Allow 51 mm (2.0 inches) of space on all sides of the terminal for adequate
ventilation and maintenance.
4.42 in. (112 mm)
4.0 in. (102 mm)
3.62 in.
(92 mm)
2.12 in.
(54 mm)
0.178 in. (4.5 mm)
Diameter
2.0 in. (51 mm)
2.0 in. (51 mm)