3 - migrate your application, Introduction, Before you begin – Rockwell Automation Migrating PanelView Enhanced Terminal Applications User Manual
Page 19: What you need, Chapter 3, Migrate your application, Introduction before you begin what you need, Chapter
19
Publication 2711P-QS001A-EN-P - October 2007
19
Chapter
3
Migrate Your Application
Introduction
In this chapter, you will import your existing PanelBuilder 1400e
application into FactoryTalk View Machine Edition (ME) software.
Different software is used by each PanelView terminal platform to
develop applications.
•
PanelView 1000e and 1400e terminals run applications created
with PanelBuilder 1400e configuration software.
•
PanelView Plus terminals run applications created with
FactoryTalk View ME software.
Before You Begin
•
Review the migration considerations table (Chapter 1).
•
Select a PanelView Plus terminal replacement and adapter plate,
if required (Chapter 2).
•
Optionally install the PanelView Plus terminal replacement
(Chapter 2). You can install the terminal after migrating and
testing your application.
What You Need
•
FactoryTalk View Studio software
•
PanelBuilder 1400e .pvc application file. The application file can
reside on your local hard drive or a CompactFlash card.