4 - review the application conversion log, Introduction, Before you begin – Rockwell Automation Migrating PanelView Enhanced Terminal Applications User Manual
Page 25: What you need, Chapter 4, Review the application conversion log, Introduction before you begin what you need, Chapter
25
Publication 2711P-QS001A-EN-P - October 2007
25
Chapter
4
Review the Application Conversion Log
Introduction
In this chapter, you will review the conversion log generated by
FactoryTalk View Machine Edition (ME) software. The results of this
log will help you to determine what updates are required in your
converted application.
Before You Begin
•
Review migration considerations (Chapter 1).
•
Select a PanelView Plus terminal replacement and adapter plate,
if required (Chapter 2).
•
Install the PanelView Plus terminal in the existing PanelView
1000e or 1400e panel cutout (Chapter 2).
•
Import your PanelBuilder 1400e .pvc application into
FactoryTalk View ME software (Chapter 3).
What You Need
•
A PanelBuilder 1400e application migrated into FactoryTalk
View ME software. This was done in Chapter 3.
•
The new name given the migrated application in FactoryTalk
View ME software. This was done in Chapter 3.
•
Conversion log generated by the FactoryTalk View ME import
wizard.