5 - review object mapping, Introduction, Before you begin – Rockwell Automation Migrating PanelView Enhanced Terminal Applications User Manual
Page 33: What you need, Chapter 5, Review object mapping, Introduction before you begin what you need, Chapter
33
Publication 2711P-QS001A-EN-P - October 2007
33
Chapter
5
Review Object Mapping
Introduction
In this chapter, you will review how objects and expressions from
PanelBuilder 1400 software map to FactoryTalk View Machine Edition
(ME) software.
Before You Begin
•
Review migration considerations (Chapter 1).
•
Select a PanelView Plus terminal replacement and adapter plate,
if required (Chapter 2).
•
Optionally install the PanelView Plus terminal in the existing
PanelView 1000e or 1400e panel cutout (Chapter 2).
•
Import your PanelBuilder 1400e .pvc application into
FactoryTalk View ME software (Chapter 3).
•
Review the conversion log for your migrated application
(Chapter 4).
What You Need
•
A PanelBuilder 1400e application migrated into FactoryTalk ME
software.
•
Conversion log generated by the FactoryTalk View ME Import
Wizard.