Rockwell Automation Migrating PanelView Enhanced Terminal Applications - Manual (Page 79)

Publication 2711P-QS001A-EN-P - October 2007 79
Review Unsupported Features and Implement Workarounds for Migration Issues Chapter 6
Register the ActiveX Control on a PanelView CE Terminal
Follow these steps to install and register the SBCP ActiveX control on
the PanelView Plus CE terminal.
1. Copy the contents of the VVCE41 folder, in the extracted
ME SBCP ActiveX Control folder, to the root of an empty
CompactFlash card.
2. Rename the Install.bat file to Batch.bat.
3. Turn on the PanelView Plus CE terminal without an application
running and
4. Insert a CompactFlash card into the card slot.
The autorun.exe will call the install batch file to install the
necessary files, and register the ActiveX control.
5. Restart the terminal and remove the CompactFlash card after a
display indicates that all the files were copied and registered.
The PanelView Plus CE terminal can now run your application that
requires the set bit cursor point ActiveX control.