Rockwell Automation Migrating PanelView Enhanced Terminal Applications - Manual (Page 67)

Publication 2711P-QS001A-EN-P - October 2007 67
Review Unsupported Features and Implement Workarounds for Migration Issues Chapter 6
16. Double-click a copy of the
numeric display to open its
properties.
17. Click the Connections tab.
18. Assign the ‘Visible State 2
from PLC’ associated tag to
the Value connection.
19. Repeat steps 15 to 17 until
you have assigned the
visible state tag to the Value
connection of each numeric
display.
Resize and Align the Numeric Displays
1. Resize one of the numeric
displays so that it aligns
with the arrow of the
piloted control list selector.
2. Continue to resize and align
all numeric displays so they
appear as a list.
3. Verify that the arrow aligns
with the next numeric
display when scrolling to
the next state in the piloted
control list selector.
4. Select all numeric displays
by holding down the Ctrl
key and clicking each
object.
Do not include the piloted
control list selector in the
selection.
5. Select Arrange>Group to
include selected numeric
displays in a single group.
When you resize the group,
all individual objects are
automatically resized.
The easiest way to resize
the multistate indicators is
to divide the height of the
object by the number of
visible states.