Rockwell Automation 1798-IB4 FlexArmor User Manual - Manual (Page 48)

Publication 1798-UM001B-EN-P - November 2002
3-20 Configure Your DeviceNet Adapter
3. Highlight the device in the Available Devices list and click the
right arrow to move the device to the Scanlist.
4. Click OK.
The devices in the scanlist will be mapped automatically.
To map devices manually, click the Edit I/O Parameters button.
5. Click Yes to download the changes. (You must be on line to
perform this function.)
Select Automap on Add to
automatically map the
correct amount of input and
output data at the time the
FlexArmor system is added
to the scanlist.