Rockwell Automation 5370-OCR2 PAK User Manual
Page 27
![background image](/manuals/580696/27/background.png)
Chapter 4
OCR Tool Configuration
4–8
OCR Tool Edit Panel Buttons
The following are brief descriptions of the buttons on the OCR Tool Edit
panel. Each of these functions is described in detail in the applicable section.
P&P Window
Initiates the Pick and Place function, which can move and size the OCR
Tool’s processing window.
Thresh/Filter
Displays the Threshold / Filter panel used to adjust the high/low threshold
settings and the Morph 1 filter.
Char Size
Allows you to set the size of characters within the OCR window. The
character size must be set after the threshold/filter is set and before characters
are taught.
Edit Font
Displays the Edit Font panel that allows you to teach and test OCR
characters.
Test Match
Allows you to enter a string to be tested against the current match strings.
This is used to test the operation of match strings which contain
metacharacters. Refer to Chapter 6.
Done
Exits to the Edit Toolset panel.