Rockwell Automation 5370-OCR2 PAK - Manual (Page 85)

Appendix B
Compensating for Lighting Variations
B–6
4. Use the P&P Dest to position the destination window over the character
string(s) as shown below.
AOI 1 Window
Destination Window
5. Record the X, Y, Length, and Height of the destination window for
later use.
X = _____
Y = _____
Length = _____
Height = _____
6. Display Tool 2, it should appear as shown below:
7. Set the operation to S1-S2.
8. Use P&P AOI 1 to position AOI 1 to the same position as the Tool 1
Destination (use information obtained in step 5).
9. Use P&P AOI 2 to position AOI 2 to:
X = 0
Y = 0
Length = Tool 1 Length
Height = Tool 1 Height