Rockwell Automation 5370-OCR2 PAK - Manual (Page 77)

A–B
A
Appendix
A–1
Status and Warning Messages
The following messages or codes may be displayed during OCR tool setup or
results display.
Status Code
(Hex) (Dec)
Fatal Text Conditions
0x2500 9472 No Binary correlator not installed.
Daughter board not installed or
incorrect version.
0x2501 9473 No No font defined. OCR Tool has no font assigned.
0x2502 9474 No No characters defined.
No characters are learned in this
font.
0x2503 9475 No Match string failed.
OCV match failed or no characters
recognized.
0x2504 9476 No Auto character sizing failed. Auto character size failed.
0x2505 9477 No Bad regular expression. Match string is illegal.
0x2506 9478 No No suitable characters.
No suitable characters found for
auto character size.
0x2507 9479 No Font file revision error. Font file revision error.
0x2508 9480 No Font file read error. Font file cannot be opened for read.
0x2509 9481 No Font file write error. Font file cannot be written.
0x250A 9482 No Tool scales modified.
Scale factors were limited to 1024
pixel limit.
0x250B 9483 No
Has the character size been
configured? Character size has not yet been
configured.
0x250C 9484 No OCR Tool installation error. OCR Tool installation error.