Rockwell Automation 5370-OCR2 PAK - Manual (Page 55)

Chapter 5
Creating and Editing Fonts
5–20
To define spacing:
1. Click the Spacing button on the Edit Font panel.
This displays the Define Spacing panel.
A B C D
Defines open spaces.
Defines normal spacing
between characters.
2. Click the Space Dimensions button. This displays the Pick and Place
panel.
3. Pick and place the Space Dimensions box over an open space between
characters. The length and height must be between 8 and 64 pixels. The
default size is 20 x 20.
Move space size box
over large space between
characters.
4. After the space box is properly positioned, click the Done button.