Rockwell Automation 5370-OCR2 PAK - Manual (Page 56)

Chapter 5
Creating and Editing Fonts
5–21
5. Adjust the percentage of white required in a white space using the slider.
You can also change the percentage by clicking the % field and entering a
new value using the calculator.
Slider
If the Space Dimension box has a %
white pixels greater than the % white setting, this
value will display xx% White Space.
If the Space Dimension box has a %
white pixels less than the % white setting, this
value will display xx% Gray Space.
6. Click the Character Spacing button to set the horizontal and vertical
space between characters.
This displays the Pick and Place panel.
7. Move and size the character spacing box so that it is positioned as shown
below. The length and height must be between 8 and 64 pixels.
The default size is 28 x 28. If the lines of printed characters are more
than 64 pixels apart, set the height of the Character Spacing box to 64.
Move and adjust size
of character spacing box:
8. Click the Done button to exit define spacing function.
9. Return to the OCR Tool Edit Panel to see if the spaces are recognized
properly.