Rockwell Automation 5370-OCR2 PAK - Manual (Page 29)

Chapter 4
OCR Tool Configuration
4–10
This window defines the inspection area of a character string (strings). Move
and adjust the window by clicking the P & P Window button on the OCR
Edit panel and referring to the the following:
Pick & Place
Panel
To move the Pick & Place Window
Click and hold down the mouse button in the middle of the window.
Move the mouse while holding down the mouse button and drag the
window over the characters to be read.
To size the Pick & Place Window
Click the mouse button on the corner of the window and drag the mouse
until the window encloses all the characters to be read. You can also
size the window using the arrow keys on the Pick and Place panel.
Position the window around the strings to be read, allowing sufficient
extra room to accommodate the expected movement of the strings within
the field of view. You may want to provide space before and after the
strings for leading and trailing spaces. Refer to space descriptions on
page 2–6.
Position
OCR Tool Window