Rockwell Automation 5370-OCR2 PAK - Manual (Page 70)

Chapter 7
On-Line Operation
7–2
In the toolset results panel, the first string read by the OCR Tool is shown in
the Result column. If the character string is more than 12 characters long,
only the first 12 characters are shown, followed by a tilde (
~
) character.
The Result field displays a tilde ~ if the
character string is more than 12 characters.
If you click on the OCR Tool Result, the detail panel for the OCR Tool will
be displayed. This shows the results of the individual strings read by the
tool, the number of faults (failures) the tool has recorded, and the inspection
time in milliseconds. Each of the four strings will be displayed in red in the
detail panel if it fails its match condition.
Result 1st String
Click here for Detail panel