Rockwell Automation RSBizWare BatchCampaign Users Guide - Manual (Page 15)

21
3
Installing RSBizWare BatchCampaign
There are setup procedures that must be completed before and after you install
RSBizWare™ BatchCampaign™. To define the installation process, the installation is
divided into the following three categories:
„ Pre-Installation Procedures
„ Install RSBizWare BatchCampaign
„ Configure RSBizWare BatchCampaign
Use the following checklist when installing RSBizWare BatchCampaign.
Pre-Installation Procedures
for BatchCampaign
Page
‰
Install FactoryTalk Batch 9.0 (client
components)
Required for BatchCampaign (see the Batch
Installation or Upgrade Guide for instructions if
Batch is not already installed).
‰
Install Microsoft SQL Server 2005
(Optional)
Install if recipes are stored in RDB format. 22
‰
Identify Server Name
Identify the name of the computer where the
FactoryTalk Batch Server is installed.
22
‰
Log on to Windows Log on with Administrator privileges. 22
‰
Install FactoryTalk Activation
FactoryTalk Activation is used for licensing and
must be installed prior to installing the
FactoryTalk Batch client. Since the FactoryTalk
Batch client components are required to run
BatchCampaign, this step should already be
complete.
22
Install BatchCampaign 9.0 Page
‰
Install BatchCampaign Install BatchCampaign. 22
Configure BatchCampaign Page
‰
Configure the Database Configure the database used by BatchCampaign. 26
‰
Add a Server Add from 1 to 10 FactoryTalk Batch Servers. 30
BatchCampaign.book Page 21 Wednesday, September 19, 2007 4:58 PM