Rockwell Automation RSBizWare BatchCampaign Users Guide - Manual (Page 46)

RSB IZ W ARE B ATCH C AMPAIGN U SER ’ S G UIDE
42
• •
•
•
•
To configure your FactoryTalk Batch Server recipe database, select the Configure
button. For information on configuration, see “Data Link Properties” on page 38 and
“RSBizWare BatchCampaign Database” on page 63.
M ODIFYING A S ERVER
The configuration information of a FactoryTalk Batch Server added to the RSBizWare
BatchCampaign application can be modified using the Properties dialog box.
1. Click the Properties and Settings button on the toolbar. The Properties dialog box
displays.
Batch List Count The number of batches that will automatically be placed in the batch list (in
the FactoryTalk Batch View) on the server being created. You can specify
whether you want the batch list count to be a per server count or per campaign
count. The default configuration for the batch list count is 5 batches per
campaign. The number of batches allowed per server or per campaign must
be between 1 and 999,999. (See “Buffered Batches and the Batch List” for
more information.)
Note: If the number of batches already on the FactoryTalk Batch Server’s
batch list is greater than or equal to this number, then new batches will not be
transferred from the campaign buffer to the batch list until current batches on
the batch list run to completion.
Provider This box automatically fills in with your provider name (the FactoryTalk
Batch Server Recipe Database provider) by clicking on the Configuration
button. For details on provider configuration see the Provider tab on page 38.
This box is for display only.
Source This box displays the database source. You can choose the database path by
clicking on the Configuration button. For details on the configuration see the
Connection tab on page 38.
This box is for display only.
This is necessary for BatchCampaign to be able to identify scalable deferred parameters.
Box Description
BatchCampaign.book Page 42 Wednesday, September 19, 2007 4:58 PM