Rockwell Automation RSBizWare BatchCampaign Users Guide - Manual (Page 33)

2 • Implementing Security
17
•
•
•
• •
The <Command> Confirm policy settings are located in the FactoryTalk Directory at the
following location:
„ Local | Network\ System\Policies\Product Policies\Batch\BatchCampaign\Commands .
M ODIFYING RSB IZ W ARE B ATCH C AMPAIGN C ONFIRM P OLICY S ETTINGS
If you assign specific users and/or groups to a BatchCampaign command and enable the
corresponding Confirm policy setting, then only the specified users are allowed to issue
the command. To configure
Command policy settings complete the following steps.
1. Open the FactoryTalk Administration Console and log on to the appropriate
FactoryTalk Directory.
2. Navigate to: \System\Policies\Product Policies\Batch\BatchCampaign\Commands
to modify security for control commands.
3. Right-click the Commands folder and select Properties. The Commands Properties
dialog box opens.
BatchCampaign.book Page 17 Wednesday, September 19, 2007 4:58 PM