Rockwell Automation RSBizWare BatchCampaign Users Guide - Manual (Page 32)

RSB IZ W ARE B ATCH C AMPAIGN U SER ’ S G UIDE
16
• •
•
•
•
2. Navigate to: System\Policies\Product Policies\Batch\ BatchCampaign\Commands
to modify security policy settings for the BatchCampaign commands.
3. Right-click Commands and then select Properties. The Commands Properties
dialog box opens.
4. Select the policy setting you want to configure and then click the corresponding
browse button. The Configure Securable Action dialog box opens.
5. In the Configure Securable Action dialog box you can:
‡ select a user or group and then click Remove.
‡ allow/deny a user or group access to the feature by selecting or clearing the
corresponding check box and then clicking OK.
‡ add a user account or user group by clicking Add. This option displays the Select
User and Computer dialog box.
6. In the Select User or Group dialog box you can:
‡ select a user, user group, computer or computer group and then click OK.
‡ click Create New to create and then add a new user, user group, computer or
computer group.
7. Click OK to close the View Properties dialog box.
Enabling User Confirmation for RSBizWare BatchCampaign
Commands
You can configure FactoryTalk Security to require user confirmation for batch commands.
A command that has the confirm feature enabled will not execute until the user account is
validated in the Log on to Confirm User dialog box.
To enable the Confirm feature, you must configure the BatchCampaign product policy for
the command and then set the associated <Command>
Confirm policy setting to True.
These policy settings are defined in FactoryTalk Directory for each command button
within BatchCampaign.
Product policies do not inherit security settings. When specifying permissions for product
policies, clearing both the Allow and Deny check boxes denies access to the product
feature.
Restart BatchCampaign and FactoryTalk Batch components to pick up security changes
made in the FactoryTalk Directory.
BatchCampaign.book Page 16 Wednesday, September 19, 2007 4:58 PM