Rockwell Automation RSBizWare BatchCampaign Users Guide User Manual
Page 21
Advertising
3
•
Installing RSBizWare BatchCampaign
27
•
•
•
• •
1. Click the Properties and Settings button on the BatchCampaign toolbar. The
Properties dialog box displays:
2. Select the Configure button. Click OK to acknowledge that the changes you make
will not take place until BatchCampaign is restarted.
3. The Data Link Properties dialog box displays. It contains four tabs: Provider,
Connection, Advanced, and All. Select the Provider tab if it is not already selected.
BatchCampaign.book Page 27 Wednesday, September 19, 2007 4:58 PM
Advertising