Rockwell Automation RSBizWare BatchCampaign Users Guide - Manual (Page 8)

RSB IZ W ARE B ATCH C AMPAIGN U SER ’ S G UIDE
4
• •
•
•
•
„ Replication cannot be enabled on the FactoryTalk Batch Server computer.
„ Install FactoryTalk Batch software on an NTFS formatted hard drive, as Windows
Server 2003 security features are available only for drives formatted to use NTFS.
The following is a list of the hardware and software required to install RSBizWare
BatchCampaign. The minimum requirements are listed as normal text and the
recommended requirements are listed as Bold Italic text.
FactoryTalk Batch cannot be loaded and run on a PDC.
Version 9.0 of the FactoryTalk Batch clients must be installed on the same computer as
BatchCampaign.
Server Client
Computer
1.2 GHz Pentium processor or greater,
including hyper-threading models 1.2 GHz Pentium processor or greater
Memory
512 MB RAM
(1 GB RAM recommended) 256 MB RAM
(512 MB RAM recommended)
Available Hard
Disk Space 4 GB
(8 GB recommended) 2 GB
(4 GB recommended)
Hard Disk Format NTFS
Disk Drive(s)
CD-ROM drive and a hard disk (SCSI or faster)
Monitor
256-color VGA and 800x600 minimum resolution
(SVGA TrueColor with 2 MB of video RAM and 1024x768 resolution
recommended)
Mouse Microsoft Mouse, Microsoft IntelliMouse® or compatible pointing device
Operating System Windows Server 2003 R2 Standard
Edition *
Windows Server 2003 R2 Standard
Edition * or Windows XP Professional,
Service Pack 2 *
Internet Explorer 6.0, Service Pack 1
English (United States)
Network 10 Megabit or faster Ethernet card, network cable
Network Protocol TCP/IP
BatchCampaign.book Page 4 Wednesday, September 19, 2007 4:58 PM