Rockwell Automation RSBizWare BatchCampaign Users Guide - Manual (Page 41)

4 • Using RSBizWare BatchCampaign
37
•
•
•
• •
Configuring the RSBizWare BatchCampaign Database
This section details the methods and dialog boxes used when configuring the RSBizWare
BatchCampaign database and servers. If you are configuring the database for the first
time, refer to “Configure BatchCampaign” for information.
1. Click the Properties and Settings button on the toolbar. The Properties dialog box
opens. The Properties dialog box is used to configure your BatchCampaign database,
servers, triggering and error messaging. (See “RSBizWare BatchCampaign
Database”.)
2. There are four tabs on the dialog box; each one will be described in order from left to
right. The tabs are Database, Servers, Triggering, and Miscellaneous.
BatchCampaign.book Page 37 Wednesday, September 19, 2007 4:58 PM