Rockwell Automation 57C419 5V-24V DC Input Module - Manual (Page 15)

3Ć3
P/S 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
10
Typical 10 Slot Rack
16
Typical 16 Slot Rack
Figure 3.4 Ć Rack Slot Numbers
Step 6. Attach the field terminal connector (M/N 57C375) to the
mating half on the module. Make certain that the
connector is the proper one for this module. Use a
screwdriver to secure the connector to the module.
Step 7. Turn on power to the system.
Step 8. Verify the installation by connecting the programming
terminal to the system and running the ReSource
Software.
Stop all programs that might be running.
Use the I/O MONITOR function. If the module is in the
local rack, enter the input module slot number and register
(0Ć1).
If the module is in a remote rack, enter the slot number of
the master remote I/O module, remote I/O drop number
(also called the remote rack number), input module slot
number, and register (0Ć1).
One at a time, toggle each of the input devices connected
to the input module to verify that the installation has been
completed correctly.