Rockwell Automation 6185-A 10 Inch Monitor User Manual - Manual (Page 19)

Industrial 10.4" Flat Panel Monitor 19
Publication 6185-5.0
This section describes how to operate the 6185-A Flat Panel Monitor.
You can adjust the monitor attributes using the controls on the back
panel.
Power Indicator
A tri-color LED is provided on the front panel to indicate various
operating modes. The following table describes the functions assigned to
the default LED, which is a single light that can be green, amber, or red.
Table A
Power Indicator LED
LED Color Indication
Green (solid) Normal operation
Amber (solid) Power ON, loss of video sync or disconnected video
cable
Green (blinking) Adjust mode: Horizontal position
Red (blinking) Adjust mode: Vertical position
Amber (blinking) Adjust mode: Horizontal size
Operating the 6185-A Flat
Panel Monitor