Rockwell Automation 6185-A 10 Inch Monitor User Manual - Manual (Page 29)

Industrial 10.4" Flat Panel Monitor 29
Publication 6185-5.0
Specifications
Display
Type Active Matrix Color Thin Film Transistor (TFT) LCD
Backlight
Type
Life Expectancy
Field Replaceable
Cold Cathode Tube (CCT)
25,000 hours (typical)
Yes
Nominal Display Area
Horizontal
Vertical
8.3in. (211mm)
6.2in. (158mm)
Resolution 640x480 pixels, 256K colors
Viewing Angle
Horizontal (typical)
Vertical (typical)
+/-70deg.
+40/-70deg.
Luminance (typical) 300 nit, 88 fL
Contrast Ratio (typical) 100:1
CIE coordinates
White x=0.305, y=0.329
Response Time 40 msec (typical)
Video
Supported Standards 640x400 at 70 Hz (VGA text)
640x480 at 60Hz (native)
Video Input Signal RGB analog (white level = 0.714V above ref. Black,
into 75 Ohms
Sync Input Signals H and V separate (TTL levels, positive or negative)
Input Connection HD-15
Controls and Indicators Back Panel - Horizontal Size, Vertical Position,
Horizontal Position, Contrast, Brightness, Clock,
Reset
Operator Input Touchscreen Option - Resistive or capacitive
touchscreen, with serial controller and DOS and
Windows drivers
Electrical
Line Voltage 85 to 264VAC, or 18 to 32VDC
Line Frequency 47-70Hz or DC
Ground Leakage 1.0 uA max at 1.5KVDC
Power Consumption 20W max, 30 VA