Rockwell Automation System Release 3.0 PlantPAx System Application Templates Quick Start User Manual
Page 10
![background image](/manuals/580968/10/background.png)
10
Rockwell Automation Publication PROCES-QS001A-EN-P - October 2013
Chapter 1 Configure the Controller Application
shows an example of the information required for this chapter based on a sample project using the PlantPAx Quick
Start Worksheet. The worksheet is a useful aid in completing tasks in this chapter. The controller sections of the worksheet
include the following:
• Basic controller information, such as the controller name, firmware revision, and slot number
• Local rack information
• Remote I/O layout
• Controller task rates
Figure 3 - Example of the Controller Worksheet Section
TIP
The PlantPAx Quick Start Worksheet is not the same tool as the PSE, which sizes an application based on system requirements. The
worksheet merely documents pre-determined system elements defined by the PSE.