Rockwell Automation System Release 3.0 PlantPAx System Application Templates Quick Start - Manual (Page 22)

22 Rockwell Automation Publication PROCES-QS001A-EN-P - October 2013
Chapter 1 Configure the Controller Application
4. Click Download again.
Your project is downloaded to your controller.
5. Place your controller in whatever mode is necessary.
For example, if you want the controller in Remote Run mode, from the Mode pull-down menu , choose
Run Mode.
6. When finished, save the file to a convenient location.
IMPORTANT Repeat the tasks in this chapter for the next controller, if applicable, starting on page 13 .