Add controllers to data server – Rockwell Automation System Release 3.0 PlantPAx System Application Templates Quick Start User Manual
Page 38
Advertising
38
Rockwell Automation Publication PROCES-QS001A-EN-P - October 2013
Chapter 2 Create Your HMI Project
Add Controllers to Data Server
In this section, we create device shortcuts on Data servers so controllers can be connected.
1. In the project tree, click ‘+’ to expand the RSLinx Enterprise data server and double-click Communication Setup.
2. In the Device Shortcuts pane, click Add.
3. For the shortcut name, type the controller name.
4. In the Primary pane, expand the Ethernet driver to select the controller.
5. Click Apply.
Advertising