7 reattaching the cover – Rockwell Automation TD200 AC Drive V1.0, 0.3-20V RMS, 3-Ph, 63A User Manual
Page 16
Advertising
2-6
TD200 AC Drive Installation and Operation
2.7
Reattaching the Cover
Follow these steps to reattach the drive cover.
Step 1. Position the cover on the back of the drive.
Step 2. Reinstall the six M4 machine screws finger tight, beginning with the two
middle screws, then the four corner screws.
Step 3. Beginning with the two middle screws, torque all of the screws to 4 to 6 lb-in (
.45 to .68 Nm). Do not overtighten.
Advertising